Automotive
In-cabin electronics, LED drivers and control units Automotive electronics Automotive LED drivers High power motor drivers
Industries we serve
Engineered for the
Engineered for the
environment you ship into.
Electronics for a railway signalling unit, a medical device and a consumer product are different problems. Surfytech Electronics designs against the environment, standards and duty cycle each sector actually imposes.
- Environment-driven design
- Standards and compliance
- Sector experience
Overview
Electronics for a railway signalling unit, a medical device and a consumer product are different problems. Surfytech Electronics designs against the environment, standards and duty cycle each sector actually imposes.
Worth being straight about it.
Engineered for the environment you ship into.
Engineered for the environment you ship into.
A board that works on a desk can fail on a production line, a train, an ambulance or a subsea cabinet. Temperature, vibration, electrical transients and certification shape every decision — and we plan for them at the start.
- Automotive & railways
- Industrial & energy
- Medical & defence
Every industry breaks electronics differently.
Every industry breaks electronics differently.
A rail carriage, an engine bay and a hospital room impose different demands on the same circuit. Temperature range, vibration, humidity, electrical transients, ingress protection and certification all change the design.
- 01Environmental engineeringThermal, vibration, humidity and ingress requirements turned into component and layout decisions.
- 02Electrical robustnessTransients, reverse polarity, overvoltage and surge protection designed in, not hoped for.
- 03Compliance-aware planningTest points and records prepared so evidence exists when certification is required.
- 04Long-life supplyParts chosen for availability over the service life you expect, with alternates identified.
What we do
Sectors we build for.
Each sector below has its own electrical, mechanical and documentation expectations. Explore the pages for the specific capability areas we cover.
Railways
Onboard and signalling electronics Railways electronics Connectivity solutions Testing & compliance
Industrial electronics
Control panels, drives and automation Robotics systems GUI development
Energy & power
Monitoring, metering and conversion Solar applications Battery technology
Healthcare
Diagnostic and monitoring devices Healthcare electronics IoT & sensors Embedded security
Defence
Rugged, secure and controlled supply Defence electronics Component sourcing
Connectivity
Wireless modules and gateways Wireless & RF design
Audiovisual
Displays, control and signal paths Audiovisual electronics TFT drivers Display drivers
Beauty & wellness
Smart personal care devices Motor drivers Mechanical & 3D design
What we do
Sector requirements, engineered in early.
Four steps that keep environmental and compliance constraints visible throughout the project rather than discovered at the end.
Sector discovery
Environment, standards, volumes, service life and the interfaces your product must work with.
Design for the environment
Component derating, protection strategy, enclosure and thermal path agreed before layout.
Validate
Functional, environmental and pre-compliance testing with results fed back into the design.
Deliver & support
Production documentation, supply plan and revisions as the product evolves.
What we do
The right stack for the sector.
Automotive, rail and medical work lean on different verification and documentation practices. We match the approach to the sector.
Power & protection
Wide-input regulation, load-dump and transient protection, surge and reverse-polarity handling for vehicle and industrial environments. Power supply modules
Connectivity in the field
Wireless links and gateways designed for coverage, roaming and maintenance access rather than lab conditions.
Evidence & records
Test points, measurement results and documentation prepared so the evidence exists when your certification partner asks for it. Safety lab equipment
What we do
See the sector challenge.
Illustrative scenarios, not published client case studies or measured results.
A control unit that survives the engine bay
Challenge: Heat, vibration and load dump make a consumer-grade board unreliable. Approach: Industrial and automotive parts, a derated supply and transient protection, then environmental testing.
Retrofit monitoring on an old production line
Challenge: Machines report nothing and their spares are obsolete. Approach: Non-invasive sensors and a gateway that speaks the plant’s existing protocols.
A diagnostic device built for repeat use
Challenge: The device is cleaned and handled continuously between patients. Approach: A sealed enclosure, protected controls, calibration hooks and documented test results.
Let’s plan the right engineering path together.
Let’s plan the right engineering path together.
Have an idea, a board that needs attention or a design ready for production? Tell us what you are building and where you are today.
- What happens next?
More from Surfytech Electronics
More from Surfytech Electronics
- Home
- Services
- Solutions
- Products
- Industries
- Technology expertise
- Resources
- Blog
- About
- Careers
Frequently asked questions
Good questions.
Good questions.
Clear starting points.
What teams usually ask before starting a industries we serve engagement.
Ask about your requirementsWhich industries do you work in?
Automotive, railways, industrial, energy and power, healthcare, defence, connectivity and audiovisual, among others.
Does the industry change the design approach?
Substantially. Temperature range, vibration, moisture, safety requirements and lifecycle all differ, and those set the component and design choices.
Do you work to sector-specific standards?
We design toward the standards and requirements that apply to your product, discussed during discovery. Certification is a separate process carried out by accredited bodies.
Can you work in a sector not listed here?
Yes. Tell us the sector and its constraints, and we will tell you honestly whether we are the right fit.
Start your project
Let’s plan the right
Let’s plan the right
next step for you.
Have a project, a workflow to improve or a system that needs a fresh start? Tell us what you want to achieve and we will tell you honestly what it would take.
No complete specification needed. A clear business goal is a great place to start.
What happens next?
- Share your goals, users and current challenges.
- Discuss essential features, integrations and constraints.
- Agree a practical next step and the scope for a proposal.